industrialseat.com | P45-FC | Fabric Conductive

Home

Our Distributors

Questions

Warranty

P45-FC | Fabric Conductive | Bench Height

Features:

Conductive Seating Features

View Available Colors

Options

Arm Rest Options

Click on any picture to enlarge view.

-TA	-TAA	-TAA-BXC	-TF	-TF-BXC

Fixed Height & Adjustable Width Arm Rest in Black.	Adjustable Height & Adjustable Width Arm Rest in Black.	Fixed Height & Adjustable Width Arm Rest in Chrome and ESD.	Fixed Height & Width Arm Rest in Black.	Fixed Height & Width Arm Rest in Chrome and ESD.

Adjustment Controls

Click on any picture to enlarge view.

Standard Control (STD)	Intermediate Control (-DLC)	Standard Seat-Tilt Control (-ST)	Advance Full Level Control (-FLC)

Allows adjustments of back height by hand wheel, seat height by gas cylinder, and seat lenght by hand wheel.	Allows adjustments of back height by hand wheel located on the side of the control. Seat height by the lever of the Gas Cylinder, and the seat depth is adjusted by lifting a lever on the control.	Allows Adjustement of the back Height by Hand Wheel,Seat Height by the lever of the Gas Cylinder, plus offers seat-tilt by lifting a lever. (This control allows for the seat cushion and back cushion to be tilted forward and backwards when activating a single lever.)	The seat cushion can be tilted forward and backward, and then locked into position. This control also has a knob for adjusting the back height, and a hand wheel for adjusting the tension when the seat tilt option is activated.

ESD Casters

Caster #9	Caster #9U	Caster #8	Wheel #7	Glide # 11

Model	Description	Use on
Caster #9	50mm dual nylon wheel dissipative casters with a resistance range from 5 to 50 megohms. Their distractive "zap" design assists users in identifying our conductive chairs. These casters achieve their conductivity from permanent stainless steel filaments in the nylon, and will not mark the floor.	Recommended for use on carpet, linoleum and hard tile floors.
Caster #9B	Same as #9, except braking.	Hard Floors.
Caster #9U	Same as #9, except urethane.	Concrete Floors.
Caster #9BU	Same as # 9 ,except braking with urethane.	Hard & Concrete Floors.
Wheel #7	50mm single conductive carbon filled rubber wheel, with nickel plated steel frame and hood.	Recommended for floors where cut wire leads are a problem. These casters can leave a residue.
Caster #8	50mm dual polished zinc wheel conductive casters with a resistance near zero. These casters are not designed with collars which conform to our designer bases, but are recommended for use in applications where extremely fast dissipation is required.	Not recommended for concrete floors.
Caster #8B	Same as #8 casters, except braking.	Not recommended for concrete floors.
Glide # 11	50mm dissipative black glides, these glides are recommended for limited mobility.	These glides are recommended for use in areas requiring limited mobility.